If you want to remove unwanted TV channels from your DD Free dish non-iCAS set-top box, then you can follow this step. The procedure to delete the TV Channel program in the TV channel list of the set-top box varies for different-2 brand receivers. 

You can follow the procedure mentioned in the installation manual supplied along with the STB.

EXAMPLE 1 -

Go to 'Menu > Settings > Edit Channels'. Enter 0000 when asked for the Password. Highlight 'Edit Channel List' and press OK. Scroll to a channel that you want to delete and press OK to tick the channel.

EXAMPLE 2 -

Following are the steps to be followed to delete channels in the TV channel list:

Go to ‘Edit Programme’.

Select- ‘Delete Option’.

Select the channel, using the up-down key.

Press ‘OK’.

EXAMPLE 3 -

Go to 'Menu > Installation > Enter 0000 when asked for the Password.  Select >> TV Channels and >> 'Edit Channel List' and press OK. 

Now Press the Blue button from your remote or you can check the color code showing on the screen and remote, and follow the edit channels.

Now you will see another screen for deleting TV channels, matching the color code showing on the screen, and remote and press the related button.

Scroll to a channel that you want to delete and press OK to tick the channel.

Please Note: In old low-cost Set-Top Boxes having limited storage capacity may not store all the channels, so viewers having such boxes are advised to delete the pre-stored channels using the "Delete Option" in the "Edit Programme Menu" before going for the AUTO SCAN Option for returning their Set-Top Boxes. For Manual / Auto scan is required to select FREE / FTA channels only.​​

If you have deleted any channel by mistake, then you can search that channel using DD Free dish Frequency, you can match the TV channel list one by one from here.

How to install dd free dish set-top box? -

• Know, How to scan the mpeg4 set-top box?
• How do scan or tune MPEG-2 Set-Top Box?
• How to scan or tune the HD FTA Set-Top Box?